Wagner ProCoat Plus Bedienungsanleitung PDF herunterladen (Seite 5)

English

5

Proper

use and

functions

Start

Controls and Functions

ON/OFF switch:

The ON/OFF switch turns power

to sprayer on and off.

(O=OFF, |=ON)

PRIME/SPRAY knob:

The PRIME/SPRAY knob directs

material to the material return

tube when set to PRIME or to

spray hose when set to SPRAY.

Spray hose:

The spray hose connects the

spray gun to the pump.

Pressure control:

The pressure control function is

also controlled by the PRIME/

SPRAY knob. The pressure

control regulates the amount

of force the pump uses to push

the uid and can be adjusted for

desired spray pattern.

Spray gun:

The spray gun controls the

delivery of the material being

pumped.

Trigger lock:

Engage the trigger lock whenever

the gun is not in use.

The gun is locked when the

trigger lock is at a 90º angle

(perpendicular to the trigger in

either direction).

Material return tube (a):

Fluid is sent out through the

return tube and back into the

original container when the

PRIME/SPRAY knob is in the

PRIME position.

Suction tube (b):

The suction tube draws the uid

from the original container into

the pump.

Sprays a variety of paints (oil-based and

latex), primers, stains, preservatives and other

nonabrasive materials. Do not use materials

with ash points below 70° F (21° C)

Do not use!

This pump should not be used with textured

materials, block ller, lacquers, industrial

enamels, or asphalt sealer or materials

containing HHC. See coating supplier if ash

point is not listed on the container

Safety features:

Spray gun trigger lock and pressure diffuser;

built-in tip safety guard; PRIME/SPRAY knob

for safe pressure release. Conforms to ULSTD

1450. Certied to CAN/CSAC 22.2 NO 68-92

Speciﬁcations

Weight ................................20.5 lbs

Flow rate .............................0.24 gal/minute

Power source......................1/2 Hp universal

motor

Power requirement .............15 amp minimum

circuit on 120 VAC,

60 Hz current

Generator requirement .......5000 Watt

Max. spraying pressure ......2800 PSI

Capability:

(a)

(b)

CLEAN ROLLCLEAN ROLL

MAX

MAX

SPRAY - MINIMUM

PRESSURE

Ideal for thinner spray

materials.

Also to be used

during cleanup, when

unclogging the tip, or

when using the optional

roller attachment.

SPRAY - MAXIMUM

PRESSURE

Ideal when spraying

thicker materials.

To be used during

spraying.

1 2 3 4 5 6 7 8 9 10 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare