Wagner HIGH PERFORMANCE AIRLESS SPRAYER Bedienungsanleitung Seite 1

© 1995 Wagner Spray Tech 1 All rights reserved.PRINTED IN THE U. S. A.RForm No. 0278712CHIGH PERFORMANCEAIRLESS SPRAYEROWNER'S MANUALEasy does i

© 1995 Wagner Spray Tech 10 All rights reserved.the pressure control knob counterclockwise to its lowestsetting and set the priming knob to PRIME ( ).

© 1995 Wagner Spray Tech 11 All rights reserved.spray pattern and possibly damaging the filter.This filter must be cleaned daily. If the material bei

© 1995 Wagner Spray Tech 12 All rights reserved.CLEAN UPOvernight storageShutdown1. Lock the gun by turning the gun safety switchparallel with the gun

© 1995 Wagner Spray Tech 13 All rights reserved.them into a container of water or appropriate solventfor the type of material with which you are paint

© 1995 Wagner Spray Tech 14 All rights reserved.that it is parallel to the gun body.14. Turn the motor switch to OFF.Preparing the sprayer for long te

© 1995 Wagner Spray Tech 15 All rights reserved.NOTE: The inlet valve must be oiled after every job.This will reduce or eliminate priming prob-lems th

© 1995 Wagner Spray Tech 16 All rights reserved.

© 1995 Wagner Spray Tech 17 All rights reserved.TROUBLESHOOTINGProblem Cause RemedyThe sprayer does not start up.The sprayer starts up but does not dr

© 1995 Wagner Spray Tech 18 All rights reserved.Parts Diagram – Final AssemblyITEM PART NO. DESCRIPTION QTY.1 0270590 Stand Weldment ...

© 1995 Wagner Spray Tech 19 All rights reserved.123456871110912Parts Diagram – Suction Set Assembly0270174ITEM PART NO. DESCRIPTION QTY.1 0270133 Suct

© 1995 Wagner Spray Tech 2 All rights reserved.CONTENTSCOMPONENTS ...2GENERAL DESCRIPTION .

© 1995 Wagner Spray Tech 20 All rights reserved.RWagner Spray Tech Corporation1770 Fernbrook LaneMinneapolis, Minnesota 55447Telephone (612) 553-7000

© 1995 Wagner Spray Tech 3 All rights reserved.SAFETY PRECAUTIONSThis manual contains information which must be readand understood before using the eq

© 1995 Wagner Spray Tech 4 All rights reserved.WARNINGEXPLOSION OR FIRE - Solvent and paint fumes canexplode or ignite, causing property damage and/or

© 1995 Wagner Spray Tech 5 All rights reserved.NOTE: Do not use more than 100 feet of extensioncord. If you need to paint further than 100feet from y

© 1995 Wagner Spray Tech 6 All rights reserved.SETUPAttaching the pump to the stand.1. Align the motor with the four holes on the back ofthe stand ass

© 1995 Wagner Spray Tech 7 All rights reserved.PRESSURE RELIEF PROCE-DUREFollow this procedure after the unit is assembled andbefore any operation whi

© 1995 Wagner Spray Tech 8 All rights reserved.PRIMINGPreparing to prime1. Lay the unit back on its handle so that the inlet valveis facing up. Fill

© 1995 Wagner Spray Tech 9 All rights reserved.2. Turn the PRIME/SPRAY knob to PRIME ( ).3. Turn the motor switch to ON.4. Turn the pressure control k