Wagner HIGH PERFORMANCE AIRLESS SPRAYER Bedienungsanleitung PDF herunterladen (Seite 14)

PRIMING

3. TURN SPRAYER ON.

4. Turn PRESSURE CONTROL KNOB between half

and full pressure. See Figure 20. You should then

be able to see the paint move through the suction

tube to the pump. Continue until paint flows through

the return tube. (Let unit prime 1 to 2 minutes).

Figure 20 - Turn Pressure Control Knob

CAUTION

the priming knob. Failure to do so may cause damage to

the paint pump diaphragm.

Always reduce pressure to zero

before changing the position of

CAUTION

Knob is still on spray during sprayer operation, there will

be high pressure in the hose and spray gun until the

Priming Knob is turned to PRIME A or until the spray gun

is triggered to relieve the pressure.

If the Pressure Control Knob is

reduced to zero and the Priming

PRIME THE PUMP

Continued from page 13

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 32 33

Keine Kommentare

Wagner HIGH PERFORMANCE AIRLESS SPRAYER Bedienungsanleitung Seite 14