Wagner HIGH PERFORMANCE AIRLESS SPRAYER Bedienungsanleitung PDF herunterladen (Seite 22)

CLEAN UP

21. Lock gun, reduce pressure and turn Prime/Spray

Knob to prime A .

22. Lay unit back on handle so inlet valve is facing

upward. Clean threads of inlet valve with a damp

cloth. Fill inlet valve with light household oil. See

Figure 43. Slowly increase pressure to distribute the

oil through the pump. Turn Prime/Spray Knob from

prime A to spray

B to distribute oil. Replace large

suction tube to inlet valve.

Figure 43 - Fill Inlet Valve With Oil

Figure 44 - Remove And Clean Filter

25. Wipe entire unit, hose and gun with a damp cloth to

remove accumulated paint.

23. Turn Prime/Spray Knob to prime A , reduce pres-

sure, shut sprayer off. Unplug sprayer. Refer to

Pressure Relief.

24. Remove and clean suction set filter in clean water or

solvent with soft brush. Reassemble.

IMPORTANT!

Proper cleaning and oiling of the pump after use

are the most important steps you can take to insure

proper operation after storage.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 32 33

Keine Kommentare

Wagner HIGH PERFORMANCE AIRLESS SPRAYER Bedienungsanleitung Seite 22